Pet drinking fountain solution
Functional description of pet drinking fountain solution
1. Function Description: Upon power-on, the display shows all functions, automatically calibrates to zero, and displays the pump's working mode and weight unit based on the root pendulum memory value. If there is no scale button signal within 2 minutes and the weight change on the scale tray does not exceed 20g, the scale display will be turned off (otherwise, it will clear the 2-minute time). When the scale display is turned off, briefly pressing the scale button will turn on the scale display, or if the weight change on the scale tray exceeds 20g, the scale display will turn on. Only then can other functions of the scale button be used. In the pump working state, briefly pressing the power button can toggle between energy-saving mode and regular mode (regular mode is continuous water supply, while energy-saving mode is water supply for 1 minute and rest for 30 seconds. The indicator lights on the rear panel will light up accordingly after switching, and both modes require power-off memory after switching).
Under the working state of the water pump, long press the power button for 3 seconds to turn off the water pump working mode indicator on the panel and shut down the water pump.
When the water pump is not working, long press the power button for 3 seconds to turn on the water pump by illuminating the water pump working mode indicator light (memory mode) on the panel
By detecting the water level sensor (reed switch), if a low water level signal is detected, the water pump cannot be turned on. If the water pump is in the process of being turned on, it should be turned off and the water pump working mode indicator light should be turned off.
When the filter element needs to be replaced, the filter element indicator light will illuminate. The tentative usage time of the filter element is 2 months (this time is based on the water pump working time, and the time when the water pump is turned off is not accumulated). After replacing the filter element, press and hold the filter element reset button for 3 seconds. The filter element replacement indicator light will turn off, and a countdown timer will start for 60 days. When the filter element has been used for 60 days, the filter element replacement indicator light will illuminate to indicate that the filter element needs to be replaced. The time needs to be memorized regularly, and the memory time will be retained even after power failure (once every hour).
3. When the water level is low, the low water level indicator light flashes (on for 0.4 seconds, off for 0.6 seconds), indicating that the water level is insufficient and water needs to be added. When the added water exceeds the minimum water level, the low water level indicator light goes out.
4. Light switch: Long press for 3 seconds to turn on or turn off all lights simultaneously.
Pet drinking fountain solution
6. Scale buttons: Press lightly to switch units, and press and hold for 3 seconds to reset the weight to zero. Two units are displayed: grams and ounces. The unit values are memorized when the power is turned off. The measurement range is 0-999 grams and the corresponding ounce value. The minimum display resolution is 1 gram and 0.1 ounce, with a minimum weighing capacity of 2 grams. If the display exceeds the range, it will show the upper limit mark (---). The measurement range is 0-2KG, and if it exceeds 2KG, an over-limit alarm indicator (-hi) will flash (on for 0.4 seconds, off for 0.6 seconds).
7. Scale, power, and light buttons are touch-sensitive, while the filter button is a light-touch switch.
8. Connect an external 5V 2A mobile phone charger, with 4V serving as the power supply.
